ne1 know how to by-passing the speed limiter sensor?

[j***@gmail.com]

from mark middelton :>Some makes of truck will go through the speed limiter if
the ignition key

is<BR>
played with. I.E. turn it off then straight back on again, this will let
the<BR>
engine surge for 3-5 seconds which will normally be enough to get past
the<BR>
vehicle you're trying to overtake.<BR>
Be careful if you try this at night because some trucks have the lights<BR>
wired through the ignition.:-(<BR>
Also on some vehicles it doesn't do the alternator any good.

THIS IS ABOUT AS STUPID AS IT GETS,
PLEASE PUT YOUR NAME ON YOUR TRUCK SO ANY NORMAL DRIVER CAN PULL OVER WHEN YOU
DECIDE TO PERFORM THIS TRICK , i know i was raising my voice but is was
justified i think

yea well you must be the stupid one! I know it can be done i know of
two trucks it was done on! and as soon as i see one of the guys again
i am going to ask how they did it, there trucks are the same as my
truck and they can blow my doors off. one of them told me the basics
of it but he just said a wire on the back of the transmission.... well
there are 4 wires white green red and black, i just thought someone
here might know! Since you don't.... shut the fuck up!

good on ya jesse. magnet on the gearbox will do it 100%....just dont let VOSA catch you with it on.

[j***@gmail.com]

The 600 Cummins we just got in sure run good.
Just remember that anything smaller than a 400 belongs in a dumptruck
well i see what you mean , but , here in the uk 320 is about average for a
tractor and for the test each year the pump is turned down to cut down on
smoke (big cats are a real problem and thirsty too! ) here the speed is
limited to 55mph part for economy part safety
derv is about $5.00 a gal here at that price
a 1 mpg difference is big money at the end of the year , but , and there is
always a but you
need to bypass the limiter to get round or get home friday night if my limiter
was set at 70 mph i would not bother but 55 send me to sleep by the way the
ing key trick works with
SOME scanias
drive safe regards jerry

will defo work on iveco`s but it WILL burn the ignition out,,,trust me , i know lol

[m***@gmail.com]

You obviously have no idea what a 400 big cam Cummins can do then huh

[t***@gmail.com]

It works though. I used to do it.

[t***@gmail.com]

They couldn't figure out how I was doing it.

[s***@yahoo.com]

I will back him up the Ralph Owens trucks would do that so obviously you are getting upset about something you don't know